Ozone gas can provide a safe means to disinfect personal protective equipment
A new study shows that ozone gas, a highly reactive chemical composed of three oxygen atoms, could provide a safe means for disinfecting certain types of personal protective equipment that are in high demand for shielding health care personnel from Covid-19.
Conducted by researchers at the Georgia Institute of Technology using two pathogens similar to the novel coronavirus, the study found that ozone can inactivate viruses on items such as Tyvek gowns, polycarbonate face shields, goggles, and respirator masks without damaging them – as long as they don't include stapled-on elastic straps.
The study found that the consistency and effectiveness of the ozone treatment depended on maintaining relative humidity of at least 50% in chambers used for disinfection.
WHAT THEY FOUND
Findings of the research are described in a paper posted to the medRxiv preprint server and will be submitted to a journal for peer review and publication.
Ozone can be produced with inexpensive equipment by exposing oxygen in the atmosphere to ultraviolet light, or through an electrical discharge such as a spark.
During local and regional peaks in coronavirus infection, shortages of PPE can force hospitals and other health care facilities to reuse PPE that was intended for a single use.
Health care facilities have used ultraviolet light, vaporized hydrogen peroxide, heat, alcohol and other techniques to disinfect these items, but until recently, there had not been much interest in ozone disinfection for PPE, said Finn, who also holds the James A. Carlos Family Chair for Pediatric Technology.
Ozone is widely used for disinfecting wastewater, purifying drinking water, sanitizing food items, and disinfecting certain types of equipment – even clothing.
Ozone disinfection cabinets are commercially available, taking advantage of the oxidizing effects of the gas to kill bacteria and inactivate viruses.
"There was no reason to think it wouldn't work, but we could find no examples of testing done on a variety of personal protective equipment," Finn said.
"We wanted to contribute to meeting the needs of hospitals and other healthcare organizations to show that this technique could work against pathogens similar to the coronavirus."
Phil Santangelo, a virologist in the Wallace H. Coulter Department of Biomedical Engineering, recommended two respiratory viruses – influenza A and respiratory syncytial virus (RSV) – as surrogates for coronavirus.
The two are known as "enveloped" viruses because, like coronavirus, they are surrounded by a lipid outer membrane. Influenza and RSV are less dangerous than the SARS-CoV-2 coronavirus, allowing the Georgia Tech researchers to study them without high-containment laboratory facilities.
Santangelo, Finn, and their team devised a test procedure in which solutions containing the two viruses were placed onto samples of the PPE materials under study.
The solutions were allowed to dry before the samples were placed in a chamber into which ozone was introduced at varying concentrations as low as 20 parts-per-million.
After treatment for different lengths of time, the researchers tested the PPE samples to determine whether or not any of the viruses on the treated surfaces could infect cells grown in the laboratory. The entire test procedure required about a day and a half.
"The protocol we set up reports very sensitively on whether or not the virus could reproduce, and we found that the ozone was very successful in rendering them harmless," Finn said.
"Oxidizing biological samples to a significant extent is enough to inactivate a virus. Either the genetic material or the outer shell of the virus would be damaged enough that it could no longer infect a host cell."
Loren Williams, a professor in School of Chemistry and Biochemistry, introduced the research team to a manufacturer of ozone disinfection chambers, which allowed evaluation of the equipment using the test protocol.
During the test, the researchers learned that having sufficient relative humidity in the chamber – at least 50% -- was essential for rapidly inactivating the viruses in a consistent manner.
After subjecting face masks and respirators to ozone disinfection, the team worked with Associate Professor Ng Lee (Sally) Ng from the School of Chemical and Biomolecular Engineering to evaluate the filtration capabilities of the items.
The ozone treatment didn't appear to negatively affect the N-95 filtration material.
While they ozone didn't harm the filtration ability of the masks, it did damage the elastic materials used to hold the masks on.
While the elastic headbands could be removed from the masks during ozone disinfection, removing and replacing them on a large scale may make the ozone treatment technique impractical.
Otherwise, however, ozone may offer be an alternative technique for disinfecting other types of PPE.
"Ozone would be a viable method for hospitals and other organizations to disinfect garments, goggles, and gloves," Finn added.
"It is inexpensive to produce, and we hope that by sharing information about what we've found, healthcare facilities will be able to consider it as an option, particularly in low-resource areas of the world."
How does Ozone kill a virus?
Viruses are small independent particles, built of crystals and macromolecules that multiply only within the host cell. The new coronavirus is considered an “enveloped” virus and as such is more sensitive to physiochemical challenges. Ozone destroys viruses by diffusing through the protein coat into the nucleic acid core resulting in damage of the viral DNA. At higher concentrations, ozone destroys the exterior protein shell by oxidation.
Primary spread is through the air however research has shown that the virus can live on surfaces such as doorknobs or tables for several days. A study conducted at the Cleveland Clinic has shown the virus can live on glass for up to 5 days, wood up to 4 days and plastic and stainless steel for up to 3 days.
As a gas, it can penetrate all areas within a room, including crevices, fixtures, fabrics, and the under surfaces of furniture, much more efficiently than liquid sprays, aerosols, or ultraviolet light.
Our Ozone generators
Ozone machines sterilise surfaces and air at the touch of a button
The Nara University study highlights the powerful capabilities of ozone-generating technology. The OZO Compact and OZO Sanitiser are well received in health care and nursery settings and most commercial environments where a duty of care is paramount. Achieving sterilisation at the touch of a button is welcome and well-received to face the challenges created by the COVID-19 pandemic.